Description
High-Performance Finish - WoodForce Accel
Drying Time
2h between coats / 24h complete drying
Coverage
200 – 350 sq ft per gallon
Number of Coats
2 to 3 coats (varies depending on desired finish)
Eco-friendly, low toxicity
VOC-SCAQMD compliant
Red List/CARB compliant
Accel acts as an accelerator for natural wood weathering. When applied, the wood will gray even more quickly to create a natural weathered-wood appearance. WoodForce Accel creates a unique effect depending on the surface’s exposure to weather and sun.
To ensure the wood is protected against moisture and water, a topcoat of WoodForce Clear must be applied as a finish.
- Accelerates wood weathering
- Can be combined with WoodForce Intermix to create a vintage effect
- Eco-friendly, low toxicity
- VOC-SCAQMD compliant
- Red List/CARB compliant
- Penetrates the substrate
- Breathable
- Soap and water cleanup
- Exceptionally easy to maintain
Multiple finish options possible with WoodForce Accel
Accelerated: 1st coat Accel + 2nd Clear + Clear *optional 3rd coat*
The <<accelerated>> produces a more pronounced weathered appearance than the clear finish.
Vintage color system: 1st coat Accel + 2nd Intermix + 3rd Clear
Customize the look of your exterior wood even further. The Intermix color coat can be applied only to certain areas and using the application technique of your choice to achieve the look you want.
Applying WoodForce Accel
Wood must be clean, dry and sanded. Sand the wood with an orbital sander and 80-grit sandpaper.
WoodForce can be applied with a natural bristle brush or by spraying. Always apply to wood saturation.
Application methodology varies depending on desired finish.
Accelerated (Accel+Clear+Clear *optional 3rd coat*):
Apply a generous 1st coat of Accel (6-8 mils). Allow to dry for 2h.
Then apply Clear at 4-6 mils thick.
If you decide to apply a 3rd coat, allow 2h between the 2nd and 3rd coat.
Vintage color system (Accel+Intermix+Clear):
Start with a first coat of Accel applied at 6-8 mils.
After 2h, create the Intermix blend and then apply it to the wood at 4-6 mils thickness initially.
Note: To achieve a vintage effect on the wood, you can vary the application method for the Intermix coat (2nd coat) only. Once the 2nd coat is applied to the surface, you can work it with a brush, sponge or even roller.
Also, you can dilute the 2nd coat with WoodForce Clear to accelerate the weathered wood effect.
After approximately 2h of drying – depending on application conditions – apply a coat of Clear to protect the finish (4-6 mils).
Application conditions for applying WoodForce Accel.
Ideal temperature is 21 degrees during product application, and relative humidity should be approximately 50%.
Wood must be dry, otherwise it could hinder WoodForce penetration.
Do not apply WoodForce if it is raining or rain is imminent. In case of rain, it is preferable to let the wood dry for 24h before proceeding with application.
Avoid applying WoodForce on hot wood or in direct sunlight.
There are no reviews yet.