Description
TracSafe Anti-Slip Sealer
Drying Time
6 to 8 hours between coats, 24 hours before traffic
Coverage
350 to 450 sq. ft. per gallon
Number of coats
2 coats
4-Season Resistance
Description:
TracSafe Anti-Slip Sealer is a clear coating used to make horizontal surfaces safe and slip-resistant. It provides floors and stairs with a textured finish that prevents slips and falls. TracSafe is used both indoors and outdoors. TracSafe Anti-Slip Sealer adheres to virtually all floor coverings: concrete, patio slabs, pavers, slippery fieldstone, linoleum and even ceramic.
Exterior uses: porches, steps, pool decks, patios, walkways, driveways, garage floors, balconies, foundation walls.
Interior uses: shower floors, bathroom floors, basement floors, entryways, steps.
In addition to its anti-slip properties, TracSafe is a UV, chemical, and salt-resistant sealer. It offers excellent durability and 4-season resistance.
TracSafe Anti-Slip Sealer is an excellent option for making residential (or light commercial) surfaces safe and slip-resistant. Easy to apply, you can make your floors anti-slip in just one day.
Drying Time:
- Ready to recoat: 6 to 8 hours
- Light traffic: 24 hours
Pro Tips:
- New concrete must cure for at least 30 days before applying the sealer.
- After cleaning the surface, let it dry for at least 24 hours before applying the sealer.
Product benefits:
- Adheres to all floor types
- Simple, fast, and effective option for anti-slip floors
- Indoor and outdoor use
- 4-season resistance for residential and light commercial surfaces
- Economical anti-slip finish
How to Apply
Preparation
Surfaces must be clean and free of dirt, dust, chalking, oil, peeling, or other contaminants. Very smooth materials and surfaces must be sanded to ensure TracSafe Sealer adhesion.
- Rinse the surface.
- Scrub the floor using Krud-Kutter degreaser cleaner or a surface prep solution. Scrub the floor to remove all contaminants with a nylon brush or a pressure washer.
- Rinse again.
- Let the surface dry for at least 24 hours.
If the surface you wish to paint with TracSafe is very smooth (such as ceramic, polished stone, etc.), it is best to sand the surface to create a profile and allow the sealer to bond.
If there is an existing finish on the floor, it must be sanded with 150-grit sandpaper. All traces of peeling or loose paint must be mechanically removed.
Applying TracSafe Anti-Slip Sealer
TracSafe Anti-Slip Sealer should be applied with a 10mm roller. The sealer should not be applied at temperatures below 10°C.
- Start by mixing the sealer well using a stir stick. Scrape the bottom of the container to ensure there is no sediment.
- Apply a first uniform coat of TracSafe Sealer using the roller.
- Let dry for a minimum of 6 to 8 hours. For ideal application conditions, it is best to wait until the next day.
- Apply a second coat in the same way as the first.
- To increase the anti-slip effect and durability of TracSafe, one or more additional coats can be applied.
- Wait 24 hours after applying the final coat before walking on the surface.
Essentials
Krud Kutter Cleaner
Sandpaper for orbital sanders
10mm Microfiber Roller
Heavy-duty floor brush
There are no reviews yet.