Description
100% solids epoxy floor coating (8.5L)
Product description
The ideal product
to eliminate dust,
protect
your garage
100% Solids Epoxy is a two-component, solvent-free, odorless epoxy-based coating that seals dust into the concrete and leaves your garage floor clean and washable. This floor protection system offers a very strong high-gloss finish, resistant to abrasion and chemical agents. Unlike floor paint, it does not peel under car tires. It was designed for industrial, commercial, and residential projects. Since drying and hardening occur through catalysis, no harmful solvents or odors are emitted during application. 100% Solids Epoxy is approved by the Canadian Food Inspection Agency (CFIA). It is a relatively simple concept, requiring minimal manual skills, allowing DIYers to achieve professional results.
Advantages
- Does not stick to car tires, unlike floor paint
- Contains 100% solids materials (no VOCs), allowing for indoor application without harmful odors
- Dense surface resistant to bacteria and moisture, and easy to clean
- Excellent adhesive properties, allowing application on various types of substrates
- Can be applied in multiple coats with excellent adhesion
- Meets LEED standards
- With incomparable durability, 100% Solids Epoxy resists tires, oils, and gasoline.
Coverage
- Standard colors:Maximum 400-450 sq. ft. (6-8 mil thickness)
- Clear or opaque on smooth surfaces:Approx. 400 sq. ft. (8 mil thickness)
- Clear on textured surfaces (flakes):Approx. 200 sq. ft. (20 mil thickness)
- Metallic epoxy on opaque base: 100 sq. ft.
Uses
Garage floor protection • Interior decoration • Commercial layout
Residential and commercial garages, mechanical workshops, animal shelters, professional kitchens, pharmaceutical industry, pulp and paper, bakeries, breweries, operating rooms, kitchens, meat processing labs, commercial areas, light industry, heavy industry, metal industry, warehouses, wastewater treatment, technical rooms, chemical processing, dairy products, electronics…
Passeport Élite 100% Solids Epoxy, ideal for all your interior concrete projects! This coating is an effective solution for aesthetic and durable concrete floors.
Do not apply to vertical surfaces exceeding 12 inches as it is self-leveling.
Not recommended for outdoor plywood decks, as the coating will peel due to the moisture absorbed by this type of unstable material.
Kit Contents
- Epoxy Resin | 5.67 L
- Epoxy Hardener | 2.84 L
- Detailed instruction sheet
Colors
- Clear
- 1 factory pre-mixed color (Light Grey)
- 29 opaque colors (one jar of opaque epoxy pigment must be added to a clear epoxy kit)
- 15 metallic colors (one jar of metallic epoxy pigment must be added to a clear epoxy kit)
Available colors
Factory pre-tinted color
Additional colors
Additional colors are sold in a jar ready to be mixed with the epoxy resin.
How to apply
How to apply
Learn how to apply 100% solids epoxy with our video clips.
How to apply epoxy 9:07
See how to apply epoxy on a garage floor.
How to create a full flake floor 4:31
See how to create a floor completely covered in vinyl flakes.
How to create a Cove base floor 4:26
Learn how to create a coved floor (Cove base).
Surface preparation
Proper surface preparation is crucial. Concrete must be clean, dry, and free of all grease and contaminants.
Cleaning
Wash the surface using Passeport Élite Concrete Preparation. Rinse thoroughly and let dry for at least 48 hours. For oil stains, use Passeport Élite Degreaser.
Sanding/Grinding
Resurfacing with a diamond-head polisher is by far the best surface preparation, but it can be replaced by sanding for most residential projects. Sand the surface using a sander equipped with 60-grit sandpaper to remove old layers of paint.
Dust Removal
Completely remove dust from the surface using a shop vacuum. Clear the surface of all contaminants and fine concrete dust.
Patching
Widen cracks with a grinder to release loose particles and clean them with a shop vacuum. Use a concrete crack filler. Passeport Élite 100% Solids Epoxy can be applied 4 to 6 hours later.
Catalysis and Mixing
Stir each component separately. Pour all the hardener (component B) into the epoxy resin (component A). Mix well for 4 minutes at low speed (300 to 450 rpm) using a drill equipped with a mixer. Avoid mixing at too high a speed to prevent bubbles. Regularly scrape the sides and bottom of the bucket with a stick to obtain a homogeneous mixture. Let the mixture sit for 2 minutes. Apply entirely within the next 30 minutes.
Important
Proper stirring is essential for the hardener to act uniformly. The product must be applied within 30 minutes of mixing.
Application:
Pour the product directly onto the floor in several ribbons. Quickly perform the edging with a brush. Then, use a squeegee to spread the product, and back-roll (left to right, then front to back). It is important to ensure uniform spreading over the entire surface and avoid creating puddles.
There are no reviews yet.