Description
Nu-Lustre 66 Heat-Resistant Wood Epoxy
Product Description:
Nu-Lustre 55, 57, and 66
NU-LUSTRE-66 is a high-gloss epoxy finish. A single coat of Nu-Lustre-66 is equivalent to 66 coats of varnish. Nu-Lustre-66 is thermostable, remaining clear when other epoxies haze or warp when hot objects are placed on the surface. It can be applied to newspapers and magazines, photographs, leather, wood, ceramics, stone, dried flowers, seashells, and many other items. Nu-Lustre-66 is ideal for kitchen countertops, tables, and bar tops.
Available Size:
Gallon
How to apply:
The surface to be worked on must be clean and dry, free of all dirt, wax, grease, and oil. Measure one part resin and one part hardener into separate containers. Mix vigorously for approximately 2 minutes. Then, combine the contents of each into a single container. Mix again for 1 minute and pour immediately. Bubbles that form on top can be broken by blowing on them or using a propane torch. Allow to dry for 24 hours at 20 to 25°C, and humidity below 50%.
- Covers approximately 10 sq. ft./liter or 40 sq. ft./gallon
Drying
24 h between coats
Coverage
10 sq. ft. per liter
Mixing Ratio
1:1
Heat
Resistant
How to apply
Learn how to apply Nu-Lustre 66 epoxy with our video capsules
How to make an epoxy-coated wooden table 1:58
See how to apply Nu-Lustre 66 epoxy on a wooden table.
How to apply:
The surface must be clean and dry, free of any dirt, wax, grease, and oil. Measure one part resin and one part hardener into separate containers. Mix vigorously for approximately 2 minutes. Then combine the contents of each into a single container. Mix again for 1 minute and pour immediately. Bubbles that form on the surface can be broken by blowing on them or by using a propane torch. Allow to dry for 24 hours at 20 to 25°C, and humidity below 50%. This product can be colored using universal dye.
There are no reviews yet.