Description
Alkyd Anti-Rust Primer Fast-drying
Description and Uses:
Universal low-VOC alkyd primer (< 340 g/l) with fast drying. Suitable for use on steel structures and other iron surfaces; roofs, tanks, beams, agricultural equipment, machinery. Topcoat with MétalForce 456-8XX anti-rust coating or MétalForce 456-6XXE industrial coating. Can also serve as temporary protection. Provides a smooth finish without sandblasting.
Surface Preparation:
Surface must be clean, dry and free of all contaminants. Previously painted surface: scrape off any peeling paint, paying particular attention to areas where rust has penetrated. Remove rust using a steel brush or emery paper. Sand glossy surfaces. Remove wax, grease and oil using PÉPIN ST660 thinner.
Application methods:
STIR THOROUGHLY BEFORE USE. Apply by spray to a dry film thickness of 1 to 2 mils. Thin 10 to 15% with Pépin ST661 or ST653 thinner. All application must be done at an air, surface and product temperature between 10°C and 32°C. Apply generously and evenly. One coat is sufficient. Product viscosity: 70 ± 5 KU at 25°C.
Related products:
- 3406-1342
- 3406-1343
- 3406-1345
- 3406-1348
There are no reviews yet.