Description
Kunos Universal Hard Oil for Floors
Product description
Description:
When looking to protect wood with elegance and environmental respect, few products rival Livos Kunos natural interior wood oil. This favorite product of the Colobar team is perfect for homeowners who desire professional results without compromising their comfort or health. Livos Kunos is a hard oil, designed to protect and stain in a single step, providing a rich, natural, and durable finish.
Thanks to its plant-based, solvent-free formula, subtle citrus scented, the application experience is not only effective but also pleasant. You can remain in the house during application, without experiencing the inconvenience of chemical odors. And unlike conventional products, Kunos offers exceptional coverage: up to five times more coverage for the same quantity, especially after the first coat.
It is ideal for residential or commercial floors, stairs, furniture, kitchen or bathroom cabinets — in short, all interior wood surfaces. Easy to apply, it is also economical, both in time and product: little waste, few coats, but a lasting effect. And if a touch-up is ever needed, it can be done locally without complete sanding.
By choosing Kunos, you provide your wood with protection against wear, stains, and drying, while preserving its natural beauty. For more delicate surfaces, you can even adjust the protection by carefully diluting the oil. It is a versatile, noble, and accessible product, perfectly aligned with the values of those who seek performance and environmental respect.
Features
- Natural plant-based oil, without aggressive odor
- Protects and stains in one product, for a durable finish
- Very high coverage, up to 5x more than conventional products
- Suitable for high-traffic surfaces, such as floors and stairs
- Easy to apply, even for non-professionals
- Pleasant application, citrus-scented, low VOC, no need to vacate the house
- Economical: only $0.35/sq. ft. for three coats
Drying time:
- 24 hours: between coats & light traffic on the surface
- 5 days: normal use of the surface
- 10 days: cleaning products may be used
Surface Coverage:
The number of square feet covered per 1 liter depends on several factors including: the wood species, the wood’s porosity,the gaps between boards, and the application method. It is recommended to perform a test to determine the coverage for your project.
- 1st coat: 220 sq. ft. per liter
- 2nd coat: 900 sq. ft. per liter
- 3rd coat: 2500 sq. ft. per liter
Available colors
Available colors
* Colors displayed may vary depending on screen, wood grain, texture, porosity, as well as preparation and application method. We encourage you to test on a small surface beforehand to ensure the accuracy of the desired color.
How to apply
How to apply
SURFACE PREPARATION
This step is essential for achieving a good result. Perform progressive sanding using all successive grits: for furniture up to 180 grit. For floors, up to 150 grit.
OIL APPLICATION
1st COAT
Stir the product well with a stick to thoroughly mix the pigment with the oil. Test on a small area to confirm your color. Spread a thin layer of oil using a lint-free cloth, cotton strands, or a staining pad. Wait approximately 10 to 15 minutes before completely wiping off any excess oil remaining on the wood surface with a clean cloth. Wait a minimum of 12 hours before applying the second coat.
2nd COAT
Stir the product well with a stick. Apply the oil at a rate of 11 mL / m² (approximately one tablespoon). Wait 10 to 15 minutes before completely wiping off any excess oil or polish immediately (see tips section). Wait a minimum of 24 hours before applying the third coat.
3rd COAT
Stir the product well with a stick. Apply the oil at a rate of 4 mL / m² (approximately one teaspoon). Wait 10 to 15 minutes before completely wiping off any excess oil or polish immediately (see tips section).
TIPS
1 • For a more shiny finish, replace wiping with a cloth for the 2nd and 3rd coats with polishing. Distribute a few drops of oil, respecting the suggested quantities, and polish immediately with a polisher or orbital sander. Use a non-abrasive, grit-free disc. Do not wipe afterwards.
2 • Light sanding with 800-grit paper between the 1st and 2nd coats can make the surface slightly smoother and more resistant.
Product composition
Product composition
Varies depend on color :
FAQ – Frequently asked questions
Q: Is Kunos safe to apply in an occupied home?
Yes. Kunos oil is natural, low-odor, and subtly citrus-scented. There is no need to leave the house during application.
Q: How many coats are necessary?
Three coats for optimal protection. The last two require much less product.
Q: Can I use this product on furniture or walls?
Absolutely. Kunos is suitable for walls, moldings, cabinets, as well as furniture and floors.
Q: Is it difficult to apply?
No. Kunos is easy to apply. Even beginner DIYers can use it with confidence.
Q: What is the coverage per liter?
Approximately 220 sq. ft. for the first coat, up to 2500 sq. ft. for the third.
Q: Can I do touch-ups without sanding everything?
Yes. Kunos oil allows for localized touch-ups without redoing the entire surface.
There are no reviews yet.