Description
100% solids epoxy floor coating
Product description
The ideal product
to eliminate dust,
protect
your garage
100% Solids Epoxy is a two-component, solvent-free, odorless epoxy-based coating that seals dust into the concrete and leaves your garage floor clean and washable. This floor protection system offers a very strong high-gloss finish, resistant to abrasion and chemical agents. Unlike floor paint, it does not peel under car tires. It was designed for industrial, commercial, and residential projects. Since drying and hardening occur through catalysis, no harmful solvents or odors are emitted during application. 100% Solids Epoxy is approved by the Canadian Food Inspection Agency (CFIA). It is a relatively simple concept, requiring minimal manual skills, allowing DIYers to achieve professional results.
Advantages
- Does not stick to car tires, unlike floor paint
- Contains 100% solids materials (no VOCs), allowing for indoor application without harmful odors
- Dense surface resistant to bacteria and moisture, and easy to clean
- Excellent adhesive properties, allowing application on various types of substrates
- Can be applied in multiple coats with excellent adhesion
- Meets LEED standards
- With incomparable durability, 100% Solids Epoxy resists tires, oils, and gasoline.
Coverage
- Standard colors:
Approximately 400 sq ft (first thin coat of epoxy, 5 mil thickness)
Maximum 250 sq ft (second coat of epoxy) (8 mil thickness) - Clear on smooth surface:
Approximately 250 sq ft (8 mil thickness) - Clear on textured surface (flakes):
Approximately 100 sq ft (20 mil thickness) - Safety colors:
Maximum 125 sq ft (16 mil thickness) - Metallic colors:
Maximum 60 sq ft (32 mil thickness)
Uses
Garage floor protection • Interior decoration • Commercial layout
Residential and commercial garages, mechanical workshops, animal shelters, professional kitchens, pharmaceutical industry, pulp and paper, bakeries, breweries, operating rooms, kitchens, meat processing labs, commercial areas, light industry, heavy industry, metal industry, warehouses, wastewater treatment, technical rooms, chemical processing, dairy products, electronics…
Passeport Élite 100% Solids Epoxy, ideal for all your interior concrete projects! This coating is an effective solution for aesthetic and durable concrete floors.
Does not apply to vertical surfaces exceeding 12 inches, as it is self-leveling.
Please note that the epoxy finish will yellow over time when exposed to daylight. For this reason, Super White shade #433 should be avoided with epoxy and it is preferable to do the work with non-yellowing Polyaspartic.
Can be applied on finish-grade plywood (screwed and glued) indoors only. Holes or joints in panels must be filled with epoxy filler paste beforehand. Not recommended on outdoor wood plywood decks, as the coating will peel due to moisture absorbed by this type of unstable material.
Kit Contents
- Epoxy resin | 3 L
- Epoxy hardener | 1.5 L
- Nitrile gloves
- Stir stick
- Detailed instruction sheet
Colors
- Clear
- 1 factory pre-mixed color (Light Grey)
- 29 opaque colors (one jar of opaque epoxy pigment must be added to a clear epoxy kit)
- 15 metallic colors (one jar of metallic epoxy pigment must be added to a clear epoxy kit)
Available colors
Factory pre-tinted color
Additional colors
Additional colors are sold in a jar ready to be mixed with the epoxy resin.
How to apply
How to apply
Learn how to apply SOLO monocoat oil with our how-to video
How to apply epoxy 9:07
See how to apply epoxy on a garage floor.
How to create a full flake floor 4:31
See how to create a floor completely covered in vinyl flakes.
How to create a Cove base floor 4:26
Learn how to create a coved floor (Cove base).
Surface preparation
Proper surface preparation is crucial. Concrete must be clean, dry, and free of all grease and contaminants.
Cleaning
Wash the surface using Passeport Élite Concrete Preparation. Rinse thoroughly and let dry for at least 48 hours. For oil stains, use Passeport Élite Degreaser.
Sanding/Grinding
Resurfacing with a diamond-head polisher is by far the best surface preparation, but it can be replaced by sanding for most residential projects. Sand the surface using a sander equipped with 60-grit sandpaper to remove old layers of paint.
Dust Removal
Completely remove dust from the surface using a shop vacuum. Clear the surface of all contaminants and fine concrete dust.
Patching
Widen cracks with a grinder to release loose particles and clean them with a shop vacuum. Use a concrete crack filler. Passeport Élite 100% Solids Epoxy can be applied 4 to 6 hours later.
Catalysis and Mixing
Stir each component separately. Pour all the hardener (component B) into the epoxy resin (component A). Mix well for 4 minutes at low speed (300 to 450 rpm) using a drill equipped with a mixer. Avoid mixing at too high a speed to prevent bubbles. Regularly scrape the sides and bottom of the bucket with a stick to obtain a homogeneous mixture. Let the mixture sit for 2 minutes. Apply entirely within the next 30 minutes.
Important
Proper stirring is essential for the hardener to act uniformly. The product must be applied within 30 minutes of mixing.
Application:
Pour the product directly onto the floor in several ribbons. Quickly perform the edging with a brush. Then, use a squeegee to spread the product, and back-roll (left to right, then front to back). It is important to ensure uniform spreading over the entire surface and avoid creating puddles.


















































romuald okinczyc (verified owner) –
Good product, with a nice finish, but it takes a bit more to cover the area than indicated on the can. I had 120 sq ft and had to stretch it quite a bit to cover in 2 coats, even though my surface was smooth. Service is very good and delivery fast, thank you.
Show original
bonne produit ,avec belle finition,mais ca prend en peu plus pour couvrir espace que marque sur le canne , je eu 120 p carre et je devais etirer pas mal pour pouvoir couvrir en 2 couches,pourtant ma surface ete lisse. service est tres bonne et livrasion rapide, merci
Denis royer (verified owner) –
Excellent service when I called for product information, very easy to place orders, and good delivery service. Truly a great customer experience.
Show original
Excellent service lorsque j’ai appelé pour prendre de l’information sur les produits, très simple pour passer les commandes et bon service de livraison. Vraiment une belle expérience client.
Clarence Bélanger (verified owner) –
Very good service, fast delivery, and product as ordered, excellent quality. Simple application with truly surprising results. Thanks to Colobar for the success of my project.
Show original
Très bon service , livraison rapide et produit tel que commandé d excellente qualité. Application simple avec des résultats tout à fait surprenant . Merci à Colobar pour la réussite de mon projet ..
Richard Clement (verified owner) –
Great service and advice from Colobar.
Excellent product, easy to apply and professional result.
Show original
Super service et conseil de Colobar.
Excellent produit, facile a appliquer et résultat professionnel
Carole Larouche (verified owner) –
Excellent Product.
Show original
Excellent Produit
Jean marc Boisvert (verified owner) –
Thank you so much Patrick.
Outstanding service.
It’s the perfect example of good customer service; many businesses would benefit from visiting you.
Show original
Merci infiniment Patrick
Service hors pair
C’est l’exemple parfait d un bon service à la clientèle ,plusieurs commerces aurais avantage a allez vous voir
Sylvain (verified owner) –
Excellent product, a very beautiful job.
Show original
Excellent produit une très belle job
Robitaille Claude (verified owner) –
Excellent product!
The videos are very useful.
Show original
excellent produit!
les vidéos sont très utiles
Marc-André Raymond (verified owner) –
Very good product, beautiful finish, although you have to be careful to spread it uniformly otherwise it can leave marks that are not as smooth and slightly different in color. Dries slower than many other companies whose similar products I’ve used; it allows a bit more time to apply it well. Service at Colobar is excellent and they give good advice, thank you.
Show original
Très bon produit, belle finition malgré qu’il faut faire attention pour l’étendre uniformément sinon il peut laisser des traces qui ne sont pas aussi lisse et de couleur un peu différente sèche moins vite que bien d’autres compagnies avec qui j’ai utilisé des produits similaires il laisse un peu plus de temps pour bien l’appliquer service chez colobar excellent et donne de bon conseil merci
Omar Sebbar (verified owner) –
Mon garage avait un besoin urgent de beauté, les produits fournis étaient à la hauteur des attentes. J’ai suivi les conseils et vidéos de l’équipe Colobar. Travail impeccable. Résultat final: Un garage avec Epoxy sous forme de cuve.
Merci à l’équipe colobar pour sa disponibilité et ses conseils.