Description
Céramiqueur Surf-Pro cleans and restores
Product description
Description:
Ceramic flooring is a very durable surface. However, over time, you will notice that the grout lines have become dull and no longer give you that fresh, clean look they once had.
The Céramiqueur Surf-Pro is a versatile, effective product that lets you clean various new or old surfaces at home. For example, floor ceramic tiles and their grout, unpolished or unglazed porous stone (so not marble or quartz), and even masonry (brick and stone).
Depending on your needs, it can be used occasionally, either straight or diluted by half with water.
It’s an easy-to-use stain remover, whether indoors or outdoors. Start by wetting the surface. Apply the product, let it work for about a minute while brushing, then rinse the surface thoroughly with water.
Since the Céramiqueur is a powerful product, a well-ventilated room is recommended during use. Skin and eye protection is required. However, it remains odorless.
When it comes to new surfaces, the product serves various useful purposes, such as easily removing freshly applied grout residue from tile. The same principle applies to efflorescence, the whitish deposit that can appear on new ceramic grout or on outdoor masonry walls.
For unpolished surfaces that have become dirty over the years, the Céramiqueur Surf-Pro can also clean them without damage. It will restore their beautiful appearance. Think of your entryway floor, constantly dirtied by foot traffic through all four seasons. Or your stone wood-burning fireplace mantel, dulled by smoke.
To protect porous surfaces such as grout lines or natural stone from stains, you can seal them afterward with the Scelleur Surf-Pro or any other equivalent clear sealer.
Features
- Ready to use
- Indoor and outdoor
- Cleans ceramic grout and tiles
- Can be diluted for certain surfaces
- Colorless and odorless liquid
- Removes efflorescence
How to apply
Ceramic or porcelain floor tiles and sand-based grout.
- Lightly wet the surface with water.
- Apply the undiluted product to the grout and let it work for 30 to 60 seconds.
- Scrub to loosen dirt with a nylon-bristle brush.
- Rinse with water.
To keep grout clean, it is strongly recommended to seal it to prevent stains with the Surf Pro Smart Sealer.
Ceramic wall tiles and grout with polymer or epoxy.
- Dilute the product half and half with water.
- Apply the product with a scouring pad and gently scrub with a nylon brush.
- Rinse with water.
Efflorescence issues on new grout.
Some time after installation, certain colored grouts produce efflorescent salts (a whitish effect).
- To fix this, apply the undiluted product to the grout.
- Clean with a soft-bristle brush.
- Rinse with water.
Final cleaning of ceramic tiles.
After grouting, a whitish residue sometimes remains that is hard to remove from the tile.
- Apply the undiluted product to the tiles.
- Clean with a cloth or a soft scouring pad that won’t damage the tile’s glaze.
- Rinse with water.
For regular cleaning, use the Surf Pro Smart Soaper instead.
Cleaning brick, unpolished stone, sill, lintel, granite, concrete.
For surfaces that have become dirty over the years from pollution, oxidation, mold, dust, and soot. The product is also useful for final cleaning of any masonry work.
- First, thoroughly wet the surface.
- Dilute the product half and half in a bucket.
- Apply the product with a stiff-bristle brush.
- It’s best to work on a small portion of the surface at a time.
- Scrub vigorously in all directions, following the shape of the porous or gapped brick.
- Rinse the surface with water.
Q&A
Q1: I have granite countertops and marble floor tiles, can I use the Céramiqueur?
A: No, the product could affect the glossy finish of these materials. It’s best to choose a specialized, less abrasive cleaner for this type of stone. If you’re unsure about the material, we strongly recommend testing the product first to check compatibility before cleaning.
Q2: Are there any safety precautions to follow with this product?
A: Yes. The product is corrosive and toxic. Although odorless, good ventilation must be ensured, and it must be kept out of children’s reach. Keep containers closed when not in use. Avoid all contact with skin and eyes by wearing rubber gloves and safety goggles. Never mix with other products such as bleach or similar products.
Q3: Can I clean my laminate countertop and faucets with the Céramiqueur?
A: No. The Céramiqueur must never come into contact with stainless steel, faucets, or laminate surfaces (countertops). If the Céramiqueur damages stainless steel, use automotive paste wax to fix the issue.
Q4: Does the product work on very blackened or very old grout?
Yes, it is designed to deep clean old grout and restore a cleaner look. However, if stains have penetrated deeply into unprotected grout, results may vary.
Q5: Does it require a lot of scrubbing?
No. The product works quickly and generally only requires moderate brushing with a nylon brush for optimal results.
Essentials
Essentials
Stripping glove
Floor Deck Brush
Cotton wipe for wood stains (4-Pack)
There are no reviews yet.