Description
UV-Resistant Wood Epoxy Nu-Lustre 57 by Circa
Product Description:
Nu-Lustre 57 UV-resistant
Epoxy for Wood and Concrete:
Nu-Lustre 57 (UV-resistant) is a high-gloss epoxy finish for wood and cement. A single coat of Nu-Lustre 57 is equivalent to 57 coats of varnish. NU-LUSTRE 57 is resistant to sun rays, remaining clear while other epoxies tend to yellow. It can be applied to wooden tables and furniture (indoors and outdoors), concrete countertops, ceramic, stone, and craft projects made with newspaper, magazines, photographs, leather, dried flowers, seashells, and many other items. Nu-Lustre 57 wood and concrete epoxy is ideal for outdoor applications, such as boats, paddles, fishing rods, and signs.
Instructions:
The surface must be clean and dry, free of any dirt, wax, grease, and oil. Measure one part resin and one part hardener into separate containers. Vigorously mix each of the two components individually for approximately 2 minutes. Then, combine the contents of each into a single container. Mix again for 1 minute and pour immediately. Bubbles that form on the surface can be broken by blowing on them or by using a hairdryer or a propane torch. Allow to dry for 24 hours at 20 to 25°C, and humidity below 50%.
Available in 946 ml and 3.78 liter sizes
Summary of features:
- High-Gloss Finish
- One coat equals 57 coats of varnish
- Protects surfaces from water and alcohol
- Non-yellowing, remains virtually clear
- Covers approximately 10 sq. ft./liter or 40 sq. ft./gallon
- Epoxy applied by pouring onto the surface and spreading with a squeegee
- Tool cleaning: Epoxy Thinner
- Available sizes: 946 ml and 3.78 liters
Drying
24 h between coats
Coverage
10 sq. ft. per liter
Mixing Ratio
1:1
Resistant to
UV rays
How to apply
Learn how to apply Nu-Lustre 55 epoxy with our video capsules
How to make an epoxy-coated wooden table 1:58
See how to apply Nu-Lustre 55 epoxy to a wooden table.
How to apply:
The surface must be clean and dry, free of any dirt, wax, grease, and oil. Measure one part resin and one part hardener into separate containers. Mix vigorously for approximately 2 minutes. Then combine the contents of each into a single container. Mix again for 1 minute and pour immediately. Bubbles that form on the surface can be broken by blowing on them or by using a propane torch. Allow to dry for 24 hours at 20 to 25°C, and humidity below 50%. This product can be colored using universal dye.
Latest articles on the subject
Prevent epoxy yellowing with a UV-resistant product
Carole (verified owner) –
Always the same comment: We are very satisfied, excellent product! And excellent service from Colobar. Fast delivery. I ordered on Sunday and by Tuesday I had my order—that’s service! Even with COVID, the service is perfect and I spoke with one of the salesmen, he was very pleasant. THANK YOU!
Francine Beaupré (verified owner) –
Super happy with this product! Excellent result.
Carole (verified owner) –
We are very satisfied, excellent product! And excellent service from Colobar. Fast delivery. I ordered on Sunday and by Tuesday I had my order—that’s service! Even with COVID, the service is perfect. THANK YOU!
Jean-François P (verified owner) –
Très bon produit et facile d’application. De plus, les conseils d’expert de Colobar sont excellents.
En débit du contexte sanitaire actuel, la livraison s’est effectuée en 3 jours.
Isabelle (verified owner) –
Very good product, easy to use.
Stéphane (verified owner) –
Excellent service from Colobar. Fast delivery. Effective product.
Nathalie (verified owner) –
Les époxy nu-lustre sont de très bonnes qualités. Je les choisi pour leur résistance à la chaleur et au rayon UV. Très bon service de livraison, malgré la COVID-19, mes produits m’ont été livrés en 2 jours et j’habite en Gaspésie.
Denis (verified owner) –
J’avais utilisé ce produit il y a 6 ans et ma table est toujours aussi belle….J’avais un projet à faire et j’ai choisi une autre marque ça m’a coûté une fortune car j’ai du recommencer 2 fois avec l’autre produit pour un résultat médiocre et finalement j’ai recommandé le produit circa et en une application tout était impeccable….
Sylvain (verified owner) –
Excellent produit. Un peu difficile d’application car très sensible à la poussière environnante. Un cheveux …un grain de sable va laisser une marque puisque le fini est très billant. Un léger sablage permet toutefois t’atténuer la brillance. Super bon service de l’entreprise Colobar. Service clientèle après vente super bon. Je recommande ce magasin.
Maryse Descoteaux (verified owner) –
Produit qui se travaille bien… Durabilité à voir dans futur, prix assez élevé… Je continue à magasiner voir si autre compagnie interessante