Description
Sansin Multi-Wash is a concentrated biodegradable cleaner to be diluted. It cleans almost any surface and removes mildew, dirt, rust marks, etc. Sansin Multi-Wash cleans painted or stained wood surfaces such as decks, fences, and siding. Can be used on vinyl, fiberglass, concrete, stone, and masonry surfaces. Simply apply diluted Sansin Multi-Wash to the surface and let it soak in for at least five minutes. Then rinse thoroughly using a pressure washer or garden hose and watch your surface regain its shine. In its concentrated form, Sansin Multi-Wash can be used directly as a detergent in pressure washers.
Features of Sansin Multi-Wash cleaner
-
Biodegradable
-
Made in Canada
-
LOW VOC
-
Covers approx. 100 to 200 sq ft/gal (undiluted) or up to 2,400 sq ft when diluted
-
Available in a 1-gallon container (3.78 L)
Surface preparation
-
The surface must be dry
-
Temperature must be above 10°C and ideally below 25°C
-
Wet vegetation with water or protect with a tarp during application
-
Protect surrounding surfaces with polyethylene sheeting
-
Do not allow this product to come into contact with metal, fabrics, flooring, or patio furniture
-
Keep children and pets away from the work area
Applying Sansin Multi-Wash cleaner
-
Apply an even coat by spraying, roller, brush, or with a pressure washer
-
On vertical surfaces, start at the bottom and work up, avoiding runs
-
Do not let the product dry (avoid working in direct, intense sunlight or when the surface is very hot)
-
Mist the product with water occasionally to keep it active
-
During dwell time, you may scrub the wood with a deck brush in the direction of the wood grain
-
Rinse the surface thoroughly using a garden hose or a pressure washer that delivers clean water
Dilution:
-
12:1 For occasional maintenance of wood decks or other exterior surfaces
-
5:1 For cleaning before applying a maintenance coat on surfaces to be stained or painted
-
2:1 For removing stubborn stains, mildew, or heavy dirt
-
Mix in a plastic bucket or use directly in a pressure washer
Denis Marcil (verified owner) –
Excellent résultat, prépare bien la surface pou être teinte.
Celine Rodier (verified owner) –
Très bon résultats très satisfait
Sylvain Côté (verified owner) –
Très bon produit. Enlève le gris sans enlever votre teinture. Cependant, cela enlève le lustre et l’imperméabilisation. A utiliser avant de reteindre. Aucun sablage 👍👍👍 Remplace très bien l’ancien produit concourir.
Jacques Gravel (verified owner) –
à date pour l’usage que j’en ai fait très satisfait
Jean-pierre chayer (verified owner) –
excllent pour nettoyer
Danielle (verified owner) –
Très performant. Agréablement surprise
Andre Arsenault (verified owner) –
Produit excellent pour nettoyer le bois avant d’appliquer une nouvelle couche de teinture. Enlève la saleté et le “gris”.
Maxime (verified owner) –
Excellent pour nettoyer mon patio au printemps avant l’application d’une couche de Sansin.
Gilles Laberge (verified owner) –
J’ai bien aimé ce produit. J’ai été agréablement surpris des résultats
H. Doré (verified owner) –
Très bon dégraissant. Je l’ai même utilisé sur l’asphalte pour enlever les taches d’huile.