Description
Sansin WoodForce ultra-low VOC high-performance finish
Drying Time
2h between coats / 24h complete drying
Coverage
200 – 350 sq ft per gallon
Number of Coats
2 to 3 coats (varies depending on desired finish)
Eco-friendly, low toxicity
VOC-SCAQMD compliant
Red List/CARB compliant
Description:
WoodForce Intermix is available in 7 base colors that can be mixed to achieve classic barn board colors. Or to create your own custom colors. Features pigmentation that increases WoodForce’s UV resistance.
To ensure wood protection against weather, water and moisture, WoodForce Intermix must be topcoated with WoodForce Clear.
- Available in 7 mixable colors
- Can be used with WoodForce Clear and Accel to create a unique finish
- Enhances UV resistance of the WoodForce finish
- Protects wood while allowing it to
weather naturally - Eco-friendly, low toxicity
- VOC-SCAQMD compliant
- Red List/CARB compliant
- Penetrates the substrate
- Breathable
- Soap and water cleanup
- Exceptionally easy to maintain
Multiple finish types possible with WoodForce Intermix
Intermix System <<barn board>>: 1st coat Intermix + 2nd Clear
This finish recreates the look of traditional barn boards.
You can mix Intermix colors of your choice to customize your color.
Vintage color system: 1st coat Accel + 2nd Intermix + 3rd Clear
Further customize the appearance of your exterior wood. The Intermix coat can be applied only in certain areas and with the application technique of your choice. Unique results guaranteed.
Available colors
* Colors displayed may vary depending on screen, wood grain, texture, porosity, as well as preparation and application method. We encourage you to test on a small surface beforehand to ensure the accuracy of the desired color.
Possible color blends
See mixing ratios below for desired color.
Fog Gray
- 1.5 parts WoodForce Clear
- 2 parts Intermix White
- 0.5 part Intermix Pale Gray
Granite Gray
- 1 part WoodForce Clear
- 2 parts Intermix White
- 1 part Intermix Pale Gray
Slate Gray
- 2 parts Intermix Pale Gray
- 2 parts WoodForce Clear
Comet
- 2.5 parts WoodForce Clear
- 1.5 parts Intermix Pale Gray
Basalt Brown
- 1 part Intermix Dark Brown
- 3 parts Intermix Dark Gray
Taupe
- 3 parts WoodForce Clear
- 0.5 part Intermix Pale Gray
- 0.5 part Intermix Dark Brown
Coffee
- 2 parts Intermix White
- 2 parts Intermix Dark Brown
Charcoal
- 2 parts Intermix Dark Brown
- 2 parts Intermix Dark Gray
Pigeon Gray
- 1 part Intermix Pale Gray
- 3 parts WoodForce Clear
Hatteras Gray
- 0.5 part Intermix Pale Gray
- 3.5 parts WoodForce Clear
Thunder
- 2 parts Intermix Dark Gray
- 2 parts WoodForce Clear
Oyster
- 1 part Intermix Dark Gray
- 3 parts WoodForce Clear
Ash
- 0.5 part Intermix Dark Gray
- 3.5 parts WoodForce Clear
Burnt Sienna
- 2 parts Intermix Dark Red
- 2 parts WoodForce Clear
Pepper Red
- 0.5 parts Intermix Dark Red
- 3 parts WoodForce Clear
Venetian Red
- 0.5 part Intermix Dark Red
- 3.5 parts WoodForce Clear
Brown Sugar
- 2 parts Intermix Dark Brown
- 2 parts WoodForce Clear
Dakota
- 1 part Intermix Dark Brown
- 3 parts WoodForce Clear
Walnut Brown
- 0.5 parts Intermix Dark Brown
- 3.5 parts WoodForce Clear
Raw Umber
- 2 parts Intermix Brown
- 2 parts WoodForce Clear
Fawn Brown
- 1 part Intermix Brown
- 3 parts WoodForce Clear
Beach Sand
- 0.5 part Intermix Brown
- 3.5 parts WoodForce Clear
Terra Rosa
- 2 parts Intermix Red
- 2 parts WoodForce Clear
Dawn Red
- 1 part Intermix Red
- 3 parts WoodForce Clear
Blossom Red
- 0.5 part Intermix Red
- 3.5 parts WoodForce Clear
Customer project
Floor*: WoodForce Intermix White
Railings: Alis Oil Black 101
* Note: Colobar does not recommend this product for floors.
How to apply
Applying WoodForce Intermix
Wood must be clean, dry and sanded. Sand the wood with an orbital sander and 80-grit sandpaper.
WoodForce can be applied with a natural bristle brush or by spraying. Always apply to wood saturation.
Application methodology varies depending on desired finish.
Intermix System <<barn board>>(Intermix+Clear):
Start by creating – if needed – the Intermix color blend.
Once the blend is complete, it is recommended to test on an inconspicuous area of your wood.
Apply the first coat of Intermix at 6 to 8 mils thickness. Allow to dry approximately 2h.
Then apply the Clear coat (4-6 mils). If you desire a more intense shade, you can add the Intermix blend to WoodForce Clear. However, do not exceed a maximum of 50% Intermix in the clear coat.
Vintage color system (Accel+Intermix+Clear):
Start with a first coat of Accel applied at 6-8 mils.
After 2h, create the Intermix blend and then apply it to the wood at 4-6 mils thickness initially.
Note: To achieve a vintage effect on the wood, you can vary the application method for the Intermix coat (2nd coat) only. Once the 2nd coat is applied to the surface, you can work it with a brush, sponge or even roller.
Also, you can dilute the 2nd coat with WoodForce Clear to accelerate the weathered wood effect.
After approximately 2h of drying – depending on application conditions – apply a coat of Clear to protect the finish (4-6 mils).
Application conditions for applying WoodForce.
Ideal temperature is 21 degrees during product application, and relative humidity should be approximately 50%.
Wood must be dry, otherwise it could hinder WoodForce penetration.
Do not apply WoodForce if it is raining or rain is imminent. In case of rain, it is preferable to let the wood dry for 24h before proceeding with application.
Avoid applying WoodForce on hot wood or in direct sunlight.
There are no reviews yet.