Description
Sealer floor, shower, and countertop for Loft decorative concrete
Highly resistant protector against scratches and impacts thanks to ceramic microbeads, ideal for showers, floors, worktops, and backsplashes. Highly washable, it does not whiten and provides long-lasting stain protection. It is colorless, with a velvet matt finish and a slight beading effect. Do not use on PVC shower cabins.
Apply on LOFT Waxed Concrete and LOFT Original Concrete
How to apply:
Apply a first coat of Protector, diluted with 30% water, quickly and evenly using a short-pile roller. Apply to areas of 1 to 2 m² by crisscrossing the application, then always smooth in the direction of the light.
Allow to dry for ± 4 hours before applying a second coat of Protector.
Important:
Do not overload the roller to avoid applying overly thick coats. In areas exposed to stains and water, apply a third coat after ± 4 hours of drying. If applying in a shower, create silicone joints in the corners and around the drain after the Protector has fully dried (± 48 hours). Allow 24 hours to dry before walking on your floor or using your shower. We advise against over-stressing the surfaces before the Protector has fully cured, which is for 15 days after application.
Maintenance:
Use non-abrasive household cleaning products. In high-traffic areas (hallways, worktops, etc.), reapply the protector annually.
Summary of features:
- Protector for Loft Waxed Concrete and Original
- Format: 1 liter
- Covers approximately 86 sq ft
- Cleanup: Water
- Dry in ± 4 hours
- 24 hours before walking on the surface
- Fully cured after 15 days
- VOC: 65 g/liter
Drying
4h
Coverage
86 sq ft per 1L
Number of coats
2-4 coats
Format
1 liter
Latest articles on the subject
How to Easily Resurface a Ceramic Floor with MicroConcrete
There are no reviews yet.