Description
Intumescent fire retardant paint (30-min fire rating)
Product description
Description:
Protecting a building from flames shouldn’t be complicated. Insl-X FR-210 intumescent fire-retardant paint turns a simple roll of paint into a major safety measure. In the presence of extreme heat, this specialized paint expands to form an insulating barrier that effectively slows the spread of fire while reducing smoke production. It is a smart, discreet, and certified solution that integrates perfectly into your interior finishing projects.
ASTM E-84 Class A certified, it meets insurance requirements for protecting walls, ceilings, and plywood panels near electrical entries. It is suitable for residential, commercial, and institutional sites where building code compliance and occupant safety are priorities. Property managers, contractors, electricians, and renovators find it a simple, high-performance solution that applies like a classic latex paint without specialized tools.
It can be used on primed or previously painted interior surfaces such as wood, drywall, cellulose panels, cured plaster, or masonry. It is particularly recommended for renovations, code compliance upgrades, or targeted protection of sensitive areas like utility rooms, stairwells, or electrical panels. The best time to use it? Before installing electrical equipment, or when your insurer requires a certified fire-retardant solution. The right place? Anywhere fire must not pass.
Available in white and electrical panel gray, this paint adapts to decorative finishes while ensuring high-level technical protection. Washable, nearly odorless, low-VOC, and compatible with an acrylic topcoat, it sacrifices neither comfort, appearance, nor safety. Apply two thick coats at 150–165 sq. ft. per gallon to achieve optimal 30-minute fire performance.
Insl-X FR-210 is the assurance of meeting standards without complexity or compromise. A safe choice, easy to implement, for those who want to protect their project with intelligence and efficiency.
Features
- Intumescent: forms an insulating charred layer in case of intense heat.
- Flame retardant: ASTM E-84 certified for 10 to 30 minutes of fire resistance.
- Washable matte finish: no compromise on appearance or durability.
- Easy to apply: like a classic latex paint, with no specialized equipment.
- Low odor and low VOC: ideal for occupied interiors.
- Recoatable: can be repainted without compromising its fire-retardant properties.
Drying time:
- 4 hours between coats
Coverage:
- 300 sq. ft. per gallon on smooth surfaces
Number of coats:
- 2 coats required
Recommendations:
It is recommended to apply 2 topcoats to maximize the intumescent properties of this coating.
Do not apply when air and surface temperatures are below 10°C (50°F).
Restrictions:
INSL-X FR-210 fire-retardant paint is not designed for the fire protection of steel or urethane insulation. According to the building code, these surfaces should ideally be protected with drywall. Some fire-retardant insulation foams applied by specialists may meet standards, but our INSL-X FR-210 paint does not.
Available colors
White
Square D Gray
Electrical Gray
Certifications
Certifications
10-minute Class A fire rating. ASTM E-84 with spread rate: 2 normal coats at 300–330 sq. ft. / 3.79 L (4.7–5.2 mil WFT and 2.2–2.4 mil DFT each).
30-minute Class A fire rating. ASTM E-84 with spread rate: 2 thick coats at 150–165 sq. ft. / 3.79 L (9.5–10.4 mil WFT and 4.4–4.8 mil DFT each).
FAQ – Frequently asked questions
Q: Is this paint effective on metal or urethane insulation?
A: No. It is not designed for metal or insulation. The Building Code recommends drywall for these surfaces instead.
Q: Can I repaint over it with another color?
A: Yes, without affecting fire performance, as long as you use an acrylic paint.
Q: What is the difference between 10-min and 30-min fire resistance?
A: Two standard coats provide 10 minutes of resistance. For 30 minutes, apply two thicker coats according to specifications.
Q: Is it mandatory for an electrical panel?
A: It is frequently required by insurers for surfaces supporting electrical panels.
Q: Can it be used outdoors?
A: No, this paint is designed for interior use only.
Q: Is it LEED eligible?
A: Yes, it complies with LEED criteria due to its low VOC content.
There are no reviews yet.