Description
Epoxy for wood Nu-Lustre 55
Product Description:
Nu-Lustre 55, 57, and 66
NU-LUSTRE-55 is a high-gloss epoxy finish. A single coat of Nu-Lustre-55 is equivalent to 55 coats of varnish. It can be applied to newspapers and magazines, photographs, leather, wood, ceramic, stone, dried flowers, seashells, and many other items. Nu-Lustre-55 is ideal for plaques and trophies, as well as tables and bar countertops.
Available sizes:
473 mL, 946 mL, and 3.78 L
Mixing ratio:
1 : 1
Finishing:
Gloss
Drying
24 h between coats
Coverage
10 sq. ft. per liter
Mixing Ratio
1:1
Equivalent to
55 coats of varnish
How to apply
Learn how to apply Nu-Lustre 55 epoxy with our video capsules
How to make an epoxy-coated wooden table 1:58
See how to apply Nu-Lustre 55 epoxy to a wooden table.
How to apply:
The surface must be clean and dry, free of any dirt, wax, grease, and oil. Measure one part resin and one part hardener into separate containers. Mix vigorously for approximately 2 minutes. Then combine the contents of each into a single container. Mix again for 1 minute and pour immediately. Bubbles that form on the surface can be broken by blowing on them or by using a propane torch. Allow to dry for 24 hours at 20 to 25°C, and humidity below 50%. This product can be colored using universal dye.
Latest articles on the subject
Bernard Senécal (verified owner) –
Excellent produit et vidéos/conseils excellents aussi. 3 projets à date (3 tables) et résultats A1…époustouflant je dirais :-). Le service est incroyable (ils m’ont même appelé pour vérifier un détail avant d’expédier à une occasion…!!!) et livraison rapide à la porte. Rien à redire, une entreprise très bien gérée!
André (verified owner) –
Excellent service et des conseils très pratiques.
Service incroyable…
Céline Chalifour (verified owner) –
Excellent product, makes magnificent projects!! Fast delivery and very good service.