Description
Casting Epoxy RESINOPOXY+
Drying
36h – 48h between coats
Coverage
61 in³ per liter
Number of coats
1–2 coats
UV-resistant
product
Description:
RESINOPOXY is a two-component clear epoxy resin. RESINOPOXY is specifically formulated for thick castings, modeling, and encapsulating objects. It offers beautiful transparency without yellowing. With 100% solids content, it contains no solvents and releases no VOCs. RESINOPOXY contains a UV-protective additive. With a mild odor, RESINOPOXY can be used indoors without ventilation.
Formula for calculating quantity in liters:
Length x width x thickness = number of cubic inches
divided by 61 = number of liters of epoxy required
- Clear epoxy casting system ideal for river tables and small encapsulations;
- Contains 100% solids;
- VOC-free;
- Solvent-free;
- Highly malleable and easy to work with;
- Odorless;
- Perfect thickness and flow;
- Beautiful transparency without yellowing effect.
Application Data: |
|||||||
|
Mixing: |
Mixing ratio |
Ratio for complete kit |
|||||
|
|
2 parts A to 1 part B |
Complete container of A to B |
|||||
|
Available Sizes: |
Small kit |
Medium kit |
Large kit |
Mega kit |
|||
|
Part A: 2 x 946 ml Part B: 1 x 946 ml |
Part A: 1 x 4 L Part B: 1 x 2 L |
Part A: 1 x 8 L Part B: 1 x 4 L |
Part A: 2 x 10 L Part B: 1 x 10 L |
||||
|
Color: |
Solid |
Metallic (pigment addition) |
|||||
|
|
We offer primary colors in liquid colorants (red, yellow, blue, magenta, black, white) as well as several powder pigments |
We offer 18 metallic powder pigment colors |
|||||
|
Coverage |
1″ thickness |
Cubic inches |
|||||
|
|
Small kit |
± 183 cubic inches per kit |
|||||
|
Medium kit |
± 366 cubic inches per kit |
||||||
|
Large kit |
± 732 cubic inches per kit |
||||||
|
Mega kit |
± 1830 cubic inches per kit |
||||||
|
Drying time at 72°F 55% relative humidity |
|||||||
|
|
Working time |
2 hours |
|||||
|
Touch dry |
48 hours |
||||||
|
Dry through |
72 hours |
||||||
|
Recoatable |
Between 36 and 48 hours |
||||||
How to Apply RESINOPOXY
Learn with this video how to apply and create an epoxy river table with RESINOPOXY and CRYSTALOPOXY.
How to Make an Epoxy River Table 4:53
Learn with this video how to create and make an epoxy river table.
Preparation:
The mold must not contain any cracks and must not be made of porous material. If you are using wood with bark, make sure to clean it thoroughly. You can protect the mold surface with insulation tape such as “TUCK TAPE”. Joints can also be sealed with a sealant. Place the surface to be covered in the mold.
Mixing:
Prepare only the necessary amount of product, as once mixed the product cannot be stored.
Use clean equipment to avoid contaminating the product.
Mix slowly and thoroughly to avoid creating too many air bubbles in the product.
Stir part A individually and then part B at low speed.
Mix part A and part B together in a very clean container with a drill-mounted mixer at low speed for three minutes (300 to 450 rpm).
Scrape the sides thoroughly to the bottom of the mixing container to obtain a uniform mixture.
How to apply:
Pour the resin slowly to avoid creating bubbles. It will spread and self-level. Work at temperatures between 68°F to 72°F and humidity not exceeding 65%. You can use a spatula to position the product.
Tip: Slightly warming the resin before pouring will prevent air bubbles; you can immerse your container with the mixed resin in warm water.
You must not exceed a thickness of 2″ per layer. For thicker castings, pour additional layers after 36 to 48 hours, when the first layer is still flexible but the resin no longer sticks to your fingers.
On very porous surfaces (plaster, bark, cork, wood), brush on a coat of RESINOPOXY to seal and prevent air bubble formation. Apply the remaining resin immediately.
G Charette (verified owner) –
Très bon produit et très facile à utiliser, même pour les débutants. Je le recommande 👌
Beaulieu,s (verified owner) –
Livraison rapide et bon produit 👌
Marcoux (verified owner) –
Belle job
Rejean D (verified owner) –
Bon produit mais je n’ai pas aimé les contenants qui sont des chaudières qui se verse très mal.
Ébénisterie SP (verified owner) –
Très bon produit !!!
Therrien Sylvie (verified owner) –
Première expérience de ce produit, j’ai fait pour la première fois une table rivière,pas de bulles, je suis vraiment contente, je le recommande à tout le monde.
Chantal Gordon (verified owner) –
Wow, de très bonne qualité, très peu de bulles d’air c’est de loin la meilleure résine que j’ai essayé !!! Je l’adore 😍😍😍
Yves Labonté (verified owner) –
Exellent