How to apply

Preparation

New Surface

• Surface must be smooth, clean, and dust-free.
• The substrate must first be primed with a water-based primer as needed before applying the Lime Wash Base Coat.
• To effectively seal porous surfaces such as drywall (new gypsum), cement, and wood, a multi-purpose primer-sealer is required. The Lime Wash base coat does not replace a surface primer.
• Suggestion: Benjamin Moore PRIME ALL

Existing Surface

• Surface must be smooth, clean, and dust-free.
• Recommended cleaner: Passeport Élite Biodegradable Concentrated Degreaser
• Any glossy surface, or those covered with synthetic material or oil-based paint, must be sanded, dusted, and then primed with a high-adhesion primer, allowing it to dry completely.
• Suggestion: Benjamin Moore STIX INSL-X or any other high-performance 100% acrylic primer.
• Walls previously coated with regular water-based paint in a matte or low-sheen finish do not require additional primer before applying Lime Wash Base Coat, but must also be thoroughly cleaned.

How to apply

• Mask and cover adjacent surfaces to protect them from splatters.
• If splatters occur, the product can be cleaned with water before it dries.
• Apply 2 coats of Lime Wash Base Coat using a brush or 10mm roller.
• Allow 5-8 hours of drying time between coats.
• Allow Lime Wash Base Coat to dry for at least 8 hours before overcoating with Lime Wash paint.