Krud Kutter Cleaner Degreaser by Rust-Oleum

0 customer reviews

Price range: 16,49 $ through 30,99 $

  • Sizes: 32 oz – aerosol, 3.78 L – gallon
  • Concentrated formula

Estimated delivery: 3–4 business days

In-store pickup available

Description

Krud Kutter Cleaner Degreaser by Rust-Oleum

Mixing Ratio
6:1
Project
Residential or Commercial

Krud Kutter Original is an ideal cleaner/degreaser/stain remover for surface preparation, removing oil, grease, wax residue and tar. It does not discolor, is safe for fabrics and leaves no residue. It is a biodegradable water-based formula, non-toxic and leaves no residue.

Uses

Widely used in preparation for cleaning concrete slabs before applying regular floor paint or two-component epoxy.

Krud Kutter cleaner/degreaser and stain remover is recommended for exterior siding (wood, vinyl, aluminum), all types of roofing (asphalt shingles, fiberglass shingles, cedar, tile), gutters, fences and wood decks, stucco, brick, cement blocks, masonry, driveways, walkways and concrete walls, and for recreational vehicles, patio furniture and boats.

This commercial-strength concentrated formula easily and safely removes food and beverage stains, dried latex paint, paint overspray, tape residue, glue and adhesive, acid rain, bird droppings, smoke damage, tree sap, grease and oil, marker and crayon, pet stains, brake dust, chimney soot, oxidation, lipstick, scuff marks, blood stains, sunscreen, tar and wax, chewing gum, soap scum, mildew stains, shoe polish and more.

Do not use on varnished surfaces or leather. Do not mix this product with any other chemical.

Dilutions:

  • For heavy-duty use, use the product undiluted.
  • For cleaning lightly or moderately soiled concrete, dilute the product 6:1 with water.
  • For light cleaning on surfaces such as appliances, blinds, porcelain, linoleum, aluminum, vinyl, walls and other surfaces, dilute 8:1 with water.
  • For reflective surfaces, such as computer and television screens, glass mirrors, windows, display cases, crystal, lamps and automotive finishes, add 1½ oz of concentrate to 1 gallon of water.

Mixed (1:10) with water, 3.78 L (one gallon) of concentrate cleans approximately 232 m² (2,500 sq ft).

How to apply

Always test in an inconspicuous area.

Spray Krud Kutter Original cleaner and degreaser generously on the surface to be cleaned.
Using a scrub brush, scrub the product onto soiled areas.
Let the Krud Kutter solution sit for 3 to 5 minutes.
Although Krud Kutter claims it “leaves no residue,” the rinsing step is always simple and quick to avoid leaving cleaner residue.
PRESSURE WASHER APPLICATION:
Contains anti-corrosion agents to protect pressure washer parts (bleach can corrode O-rings). Note that water pressure alone can remove paint or reveal existing discoloration caused by sun exposure.
Rinse surrounding plants with water, before and after application.
Wet the surface to be cleaned before applying the product.
Place the detergent suction hose and filter directly into the container.
Open the shut-off valve (if applicable) for maximum product flow.
For tank machines, pour the product (maximum concentration) into the pressure washer.
Spray at low pressure on a wet surface. On vertical surfaces, always spray from top to bottom.
Let the product penetrate the surface for 3 to 5 minutes.
Do not let the product dry on the surface.
Remove the suction hose from the solution and rinse the surface at high pressure by spraying the entire surface. Flush the suction hose with clean water before storage.

Features:
Sizes: 32 oz – aerosol, 3.78 L – gallon
Concentrated formula

Additional information

Formats

Quart (946ml), Gallon (3.78L)

Marques

There are no reviews yet.

Show reviews in all languages (1)

Be the first to review “Krud Kutter Cleaner Degreaser by Rust-Oleum”

Your email address will not be published. Required fields are marked *

Krud Kutter Cleaner Degreaser by Rust-Oleum
16,49 $ 30,99 $Price range: 16,49 $ through 30,99 $