Description
Finitec Surface Preparation
Product description
Finitec Surface Preparation
Finitec surface preparation product is designed to clean surfaces before restoring your floor with Finitec products. It removes greasy residues while optimizing the adhesion of Finitec finish coats. It is a simple-to-use, ready-to-apply product. It is odorless and safe for surfaces. Finitec surface preparation covers 400 sq ft per liter.
- Cleaner designed to remove contaminants
- on varnished floors before revarnishing
- Simple and ready to use
- Works in 5 minutes
- Odorless and safe
- Low VOC content
- Coverage: 400 sq ft/L
How to apply
How to apply Finitec surface preparation
1. Vacuum.
2. Test beforehand.
3. Pour the surface preparation into a paint tray. Do not pour directly onto the floor.
4. Spread over a section of approximately 50 sq ft (5 m²) at a time using the Finitec professional applicator and let sit for 5 minutes.
5. Collect residues using the Finitec mop or damp cloths and rinse the surface 2 to 3 times with warm water.
6. Repeat steps 3, 4, and 5 until the floor is completely treated. A second application may be necessary to
remove all residues.
NOTE:
– Do not use on oiled, waxed, or bare wood floors.
– Do not use surface preparation on a new, unfinished, or porous surface, such as plywood,
MDF, or HDF
Essentials
Essentials
Finitec Applicator
MicroBéton
Protective Sealer
Finitec Mop
Antony Lapierre (verified owner) –
Aucunement expliquer comment l’appliquer sur la bouteille ni sur internet.., s’il faut le diluer etc
Frédéric Riopel –
Bonjour ! On a pris connaissance du problème et l’on y a remédié. Maintenant, vous trouverez dans la section « Comment appliquer » la méthode d’application étape par étape ainsi que le guide d’application complet dans la section « Documents techniques » . Désolé pour les inconvénients.