Description
<h1>Floors & Furniture Hybrid Varnish (water-based oil)</h1>
Passeport Elite hybrid floor varnish (water-based oil) is low in VOC, dries quickly and offers superior abrasion resistance thanks to aluminum oxide. To provide a rich color to your floor, hybrid varnish is the ideal choice.
Description
Oil-modified water-based urethane varnish (hybrid) recommended for all interior wood surfaces such as: floors, furniture, woodwork, doors, cabinets, etc. This is a low-odor varnish that dries quickly and provides a durable finish with a rich golden color. Its abrasion resistance is excellent thanks to aluminum oxide technology.
Coverage:
- 125–150 ft²/pint
- 500–600 ft²/gallon
- 2,500 to 3,000 ft²/5-gallon pail
VOC:
235 g/L
Available sheens:
- Matte = 5-10% maximum
- Satin = 25–30%
- Semi-gloss = 55–60%
- Gloss = 85% minimum
Applicators:
Brush, roller (5 or 10 mm), applicator pad, spray gun
Drying time:
2-3 hours at 20°C and 50% relative humidity. The drying time of hybrid varnish varies depending on ambient temperature and relative air humidity.
Curing time:
Wait 24 hours after applying the final coat before allowing light traffic. The curing process takes 7 to 10 days (75% cured after 1 day, 90% cured after 3 days). Replace rugs after one week.
How to apply
Surface preparation:
Surfaces must be clean, dry and free of wax, grease, dirt and dust.
New wood: Sand to obtain a smooth and uniform surface.
Varnished wood: Sand to obtain good adhesion. If the varnish is peeling, strip and refinish.
Stain: If desired, use a Passeport Elite water-based stain or a non-sealing oil-based stain to stain new or bare wood.
Varnish application:
It is recommended to acclimate and apply hybrid varnish at an ambient temperature between 15 and 30°C with a relative humidity rate between 30 and 80%.
1. Mix well by stirring gently with a stick.
2. Apply 2 or 3 coats uniformly in the direction of the wood grain, sanding lightly between each coat. Do not use steel wool.
3. Allow surfaces to dry completely and wait at least 7 days before cleaning them.
Clean-up:
Clean tools with water.
Storage:
Minimum temperature 5°C, maximum temperature 35°C. Hybrid varnish is freeze-thaw stable (if frozen, allow to thaw completely before using). KEEP OUT OF REACH OF CHILDREN.
Marie Dugas (verified owner) –
S etend bien donne un bon résultat. Par contre j’avais comnande 7 gallons et je n’avais pas le temps de retourner. Il y avait deux gallons de semi lustré et 1x5gallons de satine…la première commande n’était pas disponible et personne ne m’avait avisé avant que j’appel. Il y a eu un manque de suivi…mais il m’on fait parvenir autre chose avec paiement de surplus par contre. Je dirait que sur le service ca aurais pu être mieux mais le produit est bon.