Description
Livos Alis exterior deck oil
Product description
Description:
Livos Alis protective oil is perfect for decks, siding, doors, windows, fences, and outdoor furniture made of dry wood. NO MORE PEELING!
Designed to penetrate properly prepared wood and not peel. It effectively protects wood against water damage, weather, and sunlight. It also has antifungal properties that make the wood more resistant to mold. However, this oil is not recommended for wood decks built near damp ground with little ventilation.
This finishing oil is an eco-friendly, high-performance product. The oils in this blend all come from natural sources (plants and tree resins), not petroleum derivatives. The performance of Livos Alis oil is ensured by a rigorous selection of refined ingredients, professionally combined by German scientists with recognized experience in wood protection.
Tested & approved for these woods:
- Cedar
- Treated wood
- Thermally modified wood
- Pine & spruce
- Ipe
*IMPORTANT: Let cedar and treated wood (green or brown) weather for at least 6 months before treatment.
Features
- Available in 21 natural colors
- Penetrates and impregnates the wood: will not peel
- Easy application by brush or sprayer
- Easy to touch up
- High coverage: 50 to 100 sq ft per liter for two coats
- After 2 coats, achieves a well-impregnated, water-repellent, UV-resistant surface (with color)
- Available sizes: 50 ml, 750 ml, 2.5 L, 5 L, 10 L, and 30 L
Coverage:
We recommend always doing a test to determine the actual coverage on your wood.
In general, approximately:
1 L covers between 50 sq ft (rough wood) and 100 sq ft (smooth wood) for two completed coats on wood sanded with 100-grit.
- 50 ml covers between 2.5 sq ft and 5 sq ft for 2 coats
- 750 ml covers between 66 sq ft and 133 sq ft for 2 coats
- 2.5 L covers between 125 sq ft and 250 sq ft for 2 coats
- 5 L covers between 250 sq ft and 500 sq ft for 2 coats
- 10 L covers between 500 sq ft and 1,000 sq ft for 2 coats
- 30 L covers between 1,500 sq ft and 3,000 sq ft for 2 coats
Available colors
Available colors
* Colors displayed may vary depending on screen, wood grain, texture, porosity, as well as preparation and application method. We encourage you to test on a small surface beforehand to ensure the accuracy of the desired color.
** Regarding the 002 clear outdoor oil, like any clear outdoor protector, it will not provide UV protection. It is the pigment in the oil that prevents the wood from greying.
Livos Alis notes that color 004-NATURAL offers fairly limited (lower) UV protection.
* Color 048-Chestnut matches the shade of many exotic woods. Depending on the wood species and roughness, the shade may vary significantly. The rougher the wood, the darker the resulting shade.
Clear oil can be used to protect surfaces not exposed to sunlight or to dilute the pigment concentration of other Alis colors.
How to apply
How to apply
Learn with our videos how to apply ALIS oil
How to apply Livos Alis oil 7:48
See how to apply Livos Alis oil on a cedar deck.
Application of Livos Alis 579 oil
Surface preparation
The wood must be completely dry, absorbent, clean, and dust-free. For new wood, or wood that has never been protected, we recommend—TO REMOVE MILL GLAZE—thoroughly sanding the surface using an orbital sander with 100-grit sandpaper for cedar, spruce, and treated wood. Use a coarser grit, 80, for hardwoods such as IPE. For old boards where moss, algae, fungi, or other contaminants may be present, it is essential to first clean with Livos GLOUROS Cleaner No. 1806 and rinse thoroughly. Any other cleaning or surface-prep product may cause adhesion issues. One to two days of drying time will then be required before sanding the surface with 100-grit and dusting off. The day before applying Livos Alis protective oil, cover the dry deck with a tarp to protect it from dew.
First coat:
DO NOT APPLY IN DIRECT SUNLIGHT.
Stir the product well with a stick to thoroughly mix the pigment into the oil. Test on a small area to confirm your color (see note 1). Apply by brush, sprayer, or roller to fully saturate the wood. If needed, level out any excess oil after 5 minutes. Wait at least 18 hours before applying the second coat.
Second coat:
Apply a thin coat and level out any excess oil with a brush after about 5–10 minutes.
On house siding, windows, or other vertical surfaces, a 3rd coat is recommended. Proceed the same way as for the second coat.
Cleaning:
Clean equipment with SVALOS Thinner No. 222 immediately after use.
Deck cleaning and maintenance:
Use Livos GLOUROS Cleaner No. 1806 at least once a year. It will remove contaminants and stains while helping maintain protection against mold. Reapply Livos Alis protective oil as soon as the finish shows signs of wear or has become extremely dull. Any other cleaning or surface-prep product may cause adhesion issues.
Precautions for use:
To prevent spontaneous combustion, oil-soaked tools, brushes, applicators, and rags must be kept away from air in a tightly sealed metal container or submerged in water, then disposed of.
Learn more
Learn more about the product
The product is discussed in these articles on our blog.
Product composition
Product composition
Varies depend on color :
They tried it and adopted it!
1068
Not sure about the color online?
Test the color before staining.
Order the sample size to test the color on your wood before doing the complete project—it’s smart!
Yvon Tremblay (verified owner) –
J’ai fait usage de ce produit pour la première fois. Très facile d’utilisation. Très bon rapport qualité/prix.
Michel Handfield (verified owner) –
Le produit est super mais demande un rafraîchissement à chaque printemps.
C’est le SEUL entretien (pas de sablage, de décollage …).
Gros MAIS, très dispendieux.
Michel Mayer (verified owner) –
Super produit, je l’utilise depuis plus de 10 ans sur plusieurs patios en Ipé.
Il tient très bien et mes clients sont toujours très satisfait.
Julie Venne (verified owner) –
Très satisfaite, mais je mets 4 étoiles et non 5 car je ne sais pas encore comment cela va tenir après un hiver. Mais je peux dire que cela s’applique très bien et surtout, un produit à l’huile fait ressortir définitivement mieux la richesse du bois qu’un produit à l’eau. Alis de Livos donne aussi un petit aspect satiné et cela fait très “riche” comme look.
Benoit (verified owner) –
Excellent produit. Il s’étend très bien et le résultat est à la hauteur de nos attentes
Nicole Asselin (verified owner) –
Très bon produit. Je l’ai appliqué sur ma terrasse il y a deux ans et je suis bien satisfaite, ça a bien tenu! . J’ai refait une partie de la surface cette année, pour contrer les effets du soleil ardent.
Toutefois le prix est imposant…surtout que ma terrasse est grande!
Karine (verified owner) –
Très beau produit : inodore, s’applique bien et beau résultat naturel.
Danièle Choinière –
S’applique très bien, très beau fini.
Pour le moment très satisfaite du résultat
bianca clotaire (verified owner) –
Cette huile fait une finition incroyable si elle est bien appliqué. J’adore le résultat.
Lucie –
Mon avis concerne le contenant de 5 litres : difficile à refermer de façon étanche. Cette huile a coûté 300$ … pourquoi le contenant est pas fait en fonction de le refermer. Après seulement 12 heures, une pellicule s’était formée dans le contenant. Et puis, le pinceau que j’avais pris soin de bien envelopper était raide le lendemain matin. Bizarre. habituellement, Je conserve tout pinceau sans problème le lendemain avec peinture et teinture. Bref, j’ai un doute sur la qualité. Et pourtant, il est dit que cette huile oblige pas à reprendre à chaque année – paraît il que cette huile est très supérieure aux autres teintures, etc. À suivre