Description
Flame Control Intumescent Fire-Retardant Paint (30 min)
PD-20-20A
Drying
30 min to the touch
2-4h to recoat
Coverage
155 sq. ft. per gallon on smooth surfaces
Number of coats
2 coats
30-min protection
Description:
Flame Control No. 20-20A is a VOC-compliant, Class A, interior, low-VOC, water-based paint available in a flat finish. It is a fire-retardant paint manufactured in accordance with Federal Specification TT-P-001932. It can also be used for exterior applications sheltered from direct weather, such as under siding or where protected by other exterior treatments. This coating dries quickly to a flat finish, with the appearance of conventional flat latex paint. When exposed to flame or high heat, the coating intumesces to form a thick, insulating cellular foam. This foam layer retards heat penetration, thereby reducing flame spread and delaying structural failure.
RECOMMENDED USES:
For application on all combustible surfaces when it is necessary or desirable to reduce the surface burning characteristics of the substrate. It can also be used for exterior applications sheltered from direct weather, such as oriented strand board (OSB) or plywood, to make materials non-combustible where siding or other exterior treatments are to be installed over them as a finish.
Features:
- Dries to a decorative matte finish
- Dry to the touch in 30 minutes, 2-4 hours before recoating
- Fire Hazard Classification: CAN/ULC-S102, CLASS “A”
- Complies with Federal Standard TT-P-001932
- Fire resistance up to 30 minutes
- Ideal fire-retardant paint for electrical contractors
- Available in white & black
- Can subsequently be covered with a conventional paint of any color.
Recommendations:
USED BY:
Schools, colleges, nursing homes, daycares, hospitals, correctional facilities, apartments, hotels, factories, warehouses, retail stores, restaurants, public utilities, railways and other transportation companies, oil and chemical facilities, military installations, and other facilities where Class “A” fire-retardant coatings are required.
USE WITH OR WITHOUT TOPCOAT:
A topcoat is not required for many applications. However, all surfaces likely to be frequently handled or cleaned must be coated with Flame Control No. 40-40A Finish Paint.
There are no reviews yet.