Description
Sikkens SRD RE by SICO
Coverage
250 to 400 sq ft per gallon
Number of coats
1 coat
Water-repellent protective coating
UV protection
Product Description:
SRD RE PROLUXE is a semi-transparent stain composed of an alkyd and linseed oil blend. Single-coat application protects multiple types of exterior wood surfaces. SRD can be applied on decks as well as siding, shingles, and fences. This easy-to-use coating offers excellent protection against UV rays and moisture while allowing color transparency.
If you have a choice among Proluxe products for a wood deck flooring project, SRD stain would be the best choice as it is less susceptible to peeling. This is due to its thinner surface film. However, if you want to stain a more humid surface, such as a patio installed directly on the ground, it would be preferable to consider a product that tolerates a higher moisture content in the wood.
Key properties:
- Single-coat application (1 coat) for easy and quick maintenance
- Water-resistant finish that protects against UV rays
- Formula reinforced with iron oxide pigments to fight mildew and aging
- Less film-forming finish than other formulas in the Sikkens Proluxe range
- SRD is the most liquid and penetrating stain in the Proluxe range
Preparation
The wood must be perfectly clean, dry, and freshly sanded with 80-grit using an electric orbital sander to remove any graying or milling patina (new wood). This important step ensures proper opening of the wood pore so it can absorb the stain uniformly and sufficiently. For all other cleaning preparation tips, consult this explanatory article!: https://colobar.ca/sikkens-srd-une-solution-simple-et-economique-pour-proteger-le-bois-exterieur/
How to apply
The wood must be completely dry at the time of application following cleaning or rain. Ideally, its moisture content will be 12%-18% maximum. To avoid complications, it is important to wait 48h after rain or cleaning before applying SRD and to have 2 rain-free days following application. You will therefore need a 4-day rain-free window.
Proluxe SRD can be applied at temperatures between 10 and 32℃. If the wood is hot or the sun is beating down on the surface, do not proceed with application.
The best tools for applying SRD Proluxe to your wood are the detachable handle brush and the natural or synthetic bristle brush.
The product could be sprayed on the surface with a sprayer, but in this case, you must immediately go over it with a brush to ensure the stain penetrates the wood properly and uniformly.
Apply the stain board by board, following the direction of the wood grain.
Always keep the edge wet to avoid lap marks.
Once the board is finished, continue in the same manner on the other boards.
For maximum protection, apply stain to all accessible surfaces, including cut ends.
Since horizontal surfaces are exposed to more abrasion and moisture, it is better to apply a coat of SRD every year to prevent the product from wearing down to the wood. This way, sanding is avoided and a good cleaning is sufficient before applying the refresher coat.
For vertical surfaces, apply a new coat every 3 to 4 years, depending on the wood’s sun exposure.
Transparency level: Translucent
Finish: satin
Recommended uses: Siding, Railings, Decks, Split shingles, Shingles, Fences, Docks, Patio furniture, Log homes
Application temperature
Apply Proluxe SRD at temperatures between 10 and 32℃. If the wood is hot or the sun is beating down on the surface, do not proceed with application.
Drying time:
- 6 hours dry to touch
- 48 hours for light traffic
- 72h minimum for repositioning furniture/heavy traffic
(At 20 oC (68 oF) and 65% relative humidity)
You must wait a minimum of 48h after rain before proceeding with application. Similarly, you must plan for 2 days following application without risk of rain.
In very humid and hot weather, it is common for the product to take several days to dry.
Number of coats:
1 coat with refresher as needed
Cleanup: Mineral spirits
Available colors
* Colors displayed may vary depending on screen, wood grain, texture, porosity, as well as preparation and application method. We encourage you to test on a small surface beforehand to ensure the accuracy of the desired color.
Latest articles on the subject
Guide to the Best Exterior Stains for Your Deck
The Ultimate Guide to Staining a Wooden Deck
Does a solid deck stain that doesn’t peel actually exist?
Marc (verified owner) –
Excellent produit, une seule couche. Service impeccable, livraison rapide et emballage approprié!
celine Gascon (verified owner) –
Produit agréable à appliquer et rendement excellent
Robert Vallee –
Très satisfait,le meilleur prix et livraison rapide, je ferai encore affaire avec vous sans problème. Merci
B. Germain (verified owner) –
Bien satisfait! La commande était prête moins de 24 heures plus tard.
Félicitations. Je retournerai vous voir dans un proche avenir!