Description
Waterborne Bonding Primer STIX
General description:
Stix Waterborne Bonding Primer is a premium quality acrylic urethane sealer with unparalleled adhesion to the most challenging surfaces, including: glossy tile, PVC, plastic, glass, glazed block, glossy paint, pre-coated siding, fiberglass, and galvanized metals, aluminum, and copper. Stix is also ideal for use on plaster, drywall, wood, and non-ferrous metals where low ambient or surface temperatures are a concern for conventional primers. For use on interior and exterior surfaces, it can be topcoated with almost any type of coating, including alkyd, acrylic latex, urethane, epoxy, and lacquer finishes. Stix is a low-VOC primer that levels to a smooth surface and cleans up with soap and water.
Recommended uses:
Interior and exterior surfaces. Drywall, plaster, ceilings, acoustic tiles, wood trim and doors, Formica, ceramic tile, glossy surfaces, PVC, masonry walls, wood siding, cedar and redwood, wood fences, trim, shutters, masonry, stucco, concrete, concrete block, galvanized metal, aluminum, vinyl siding, etc.
Restrictions:
Apply when air, surface, and product temperatures are above 1.7°C (35°F).
Do not apply in direct sunlight or on hot surfaces. Avoid rain and high humidity during the first 24 hours of curing.
Not intended for underwater use or continuous contact with water. Not for below-grade applications.
Not recommended for use on polyethylene or polypropylene. Stix must be topcoated when used outdoors.
Features:
- Creates an extremely hard coat
- Can be topcoated with almost any finish
Bonding primer for:
Glossy and hard-to-coat surfaces
Use:
Interior and Exterior
Resin type:
Acrylic urethane
Curing:
Temperatures as low as 2°C (35°F)
Available color:
White, tintable with up to 2 oz of universal colorant
Coverage per container:
3.78 L – 300 to 400 sq. ft.
Application:
Brush, Roller, or Sprayer
Clean up:
Warm soapy water
Availability:
Quart (946 mL) and Gallon (3.78 L)
Drying time under normal conditions:
Tack-free:
30 minutes
To recoat:
3 to 4 hours
Full cure:
3 to 4 days
Low odor and low VOC:
50 g/L
Latest articles on the subject
4 simple steps to refurbish a countertop without tearing it out: The concrete look
Protect Your Countertop with a Wood Countertop Oil
yvon lemieux (verified owner) –
Very good product for cabinets and ceramics with good preparation.
pierrette chantal –
Je ne suis pas satisfaite , de l’apprêt ne cache pas assez
et la peinture advance pour armoire la même chose nous sommes à 2 couches de peinture et une couche d’apprêt et le fond apparait , et nous avons utilisé les rouleaux tel qu’indiqués. Insatisfaite
Philippe Lemieux (verified owner) –
I am very satisfied.
The product goes on well and covers very well.
Martine Turcotte (verified owner) –
I am really satisfied with this product.
Daniela (verified owner) –
Très bon produit! J’ai l’utilisé sur du verre
Michel Amringer (verified owner) –
We are very satisfied with the quality of the product.
Chantal Bisson (verified owner) –
Very high quality product and hides surfaces well. I recommend.
Chantal (verified owner) –
Apprêt qui fonctionne très bien sur les armoires de cuisine. Même chose pour faire la transition de la peinture à l’huile vers la peinture latex sur les murs.
Caroline (verified owner) –
Apprêt de grande qualité et très peu odorant qui permet de masquer certains défauts de surface et facilite l’adhésion du revêtement final.
Nathalie (verified owner) –
We painted our kitchen cabinets, it’s wonderful 😊 highly recommended.