Description
Fast-drying oil-based primer Prime Lock
General description:
Prime Lock Plus is a fast-drying alkyd resin primer designed to prime and seal plaster, wood, drywall, and previously painted or varnished surfaces. It provides the finish coat with a uniform sheen and appearance (excellent enamel holdout) and seals even the most difficult stains without raising the wood grain. It can be topcoated with an alkyd or latex finish. Suitable for interior surfaces and can be used as a spot primer on exterior surfaces.
Recommended uses:
Wood—Weathered, burned, or charred wood. Use as an enamel undercoat before applying latex or oil finish coats. One or more coats can be used to seal stains on common wood types that bleed. Drywall/Plaster: Excellent as a wall primer before painting or hanging wallpaper. Blocks common household stains from food, grease, and graffiti. Glossy/difficult surfaces: Prime Lock Plus provides improved adhesion on hard-to-paint surfaces such as glossy paint, Formica, tile, marlite, PVC, and ceramic tile.
Restrictions:
- Do not apply at temperatures below 7.2°C (45°F).
- Do not apply if the surface temperature is within 5 degrees of the dew point.
Use:
Interior and exterior
Resin type:
Alkyd
Available colour:
White
Coverage per container:
3.78 L – 300 to 350 ft²
Application:
Brush, Roller, or Sprayer
Cleaning:
Paint thinner
Availability:
Quart (946 mL) and Gallon (3.78 L)
Drying time under normal conditions:
Tack-free:
30 minutes
Ready to recoat:
1 – 2 hours
Full cure:
7 to 10 days
Low odour and low VOC:
337 g/L
Drying
1 – 2 h before recoating
Coverage
350 sq ft per gallon
Number of coats
1 coat
Latest articles on the subject
4 simple steps to refurbish a countertop without tearing it out: The concrete look
Protect Your Countertop with a Wood Countertop Oil
There are no reviews yet.